EPOXY COAL TAR CARBOLINE BITUMASTIC 300M GALLON
425.00 TTD
Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
Features:
-Excellent chemical, corrosion and abrasion resistance
-High-build up to 35 mils (875 microns) in a single coat
-Compatible with controlled cathodic protection
-Meets or exceeds all requirements of:
- Corp of Engineers C-200, C200a
- AWWA C-210-92 for exterior
- SSPC-Paint 16
- Steel Tank Institute Corrosion Control System STI-P3
Color: Black (0900)
Finish: Will discolor, chalk and lose gloss in sunlight exposure.
Primers: Self-priming, Carboguard 888
Topcoats: Not recommended
Dry Film Thickness: 16.0 mils (400 microns) in one or two coats. Total dry film thickness less than 8 mils (200 microns) or in excess of 35 mils (875 microns) not recommended.
Solids Content: By volume: 74% +/- 2%
Theoretical Coverage Rate: 1187 mil ft2 (29.1 m2/I at 25 microns). Allow for loss in mixing and application.
Nominal VOC Values
- As supplied: 2.0 Ibs/gal (192 g/I)
- Thinned: 20 oz/gal w/ #10: 2.6 Ibs/gal (307 g/I)
- Thinned: 25 oz/gal w/ #10: 2.7 Ibs/gal (325 g/I)
Dry Temperature Resistance:
- Continuous: 350°F (177°C)
- Non-Continuous: 370°F (190°C)
Wet Temperature Resistance
Immersion temperature should not exceed 49 Celsius.
Limitations: Do not use for potable water requirements.
